UL UL
Email:   Password:      New User?  Forgot your password?
Welcome Back Anonymous User   Update Profile | View Cart | Learning Plan | Learning History | Log Out   

Designing Safety-Related Machinery Control Systems in Accordance with ISO 13849 and IEC 62061


Description

This three-day technical training course will cover Functional Safety Standards and concepts related to the EU Machinery Directive.  Standards covered in this course include ISO 13849 (Safety of Machinery – Safety-Related Parts of Control Systems) and IEC 62061 (Safety of Machinery – Functional Safety of Safety-Related Electrical, Electronic, and Programmable Electronic Control Systems).  In addition, other topics such as Hazard Identification and Risk Assessment in accordance with ISO 12100 will be covered.  Case studies such as motor drives and safety PLCs will be used to provide examples of how the requirements and concepts of the standards are applied. 

 

Workshop Topics

  • Role of EN ISO 13849 and IEC/EN 62061 in machine safety regulations
    • EU Machinery Directive
    • OSHA
  • Comparative overview of EN ISO 13849 and IEC/EN 62061
  • Hazard Identification and Risk Assessment (According to standard ISO 12100)
  • Design in accordance with ISO 13849
    • Risk reduction and required Performance Level
    • Determination of required Performance Level
    • Parameters of Performance Level
    • MTTF: Mean Time To dangerous Failure, DC: Diagnostic Coverage
    • Category, CCF: Measures to avoid Common Cause Failures
    • Failures to be considered and fault exclusion
    • How to perform FMEDA
    • Evaluation of Performance Level (“Simplified procedure”)
    • Software Safety Requirements
    • Software-based parameterisation
    • Combination of SRP/CS to achieve PL
  • Design in accordance with IEC 62061 (considering overlaps with ISO 13849)
    • SIL assignment
    • Specification of requirements for SRCFs
    • Functional decomposition
    • Realisation of subsystems
    • Determination of the safety performance of the subsystem
    • Estimation of PFHD of subsystems
    • Contribution of common cause failure (CCF)
  • The future of IEC 62061 and ISO 13849

Objectives

  • Identify the required risk reduction and functional safety ratings (PL and SIL) to be provided by control systems
  • Develop a safety concept that satisfies the requirements of both ISO 13849 and IEC 62061
  • Apply the steps required by both ISO 13849 and IEC 62061 to achieve the required risk reduction and validate it

Learning objectives will be measured by:

  • Participant’s knowledge retention will be reinforced by answering questions in the activity guide, throughout the course.

Target Audience

  • Hardware/software engineers
  • Electrical construction engineers
  • Approvals and safety compliance engineers
  • Application engineers
  • Field installation and service engineers
Click here for terms and conditions...

Media

Time Requirement

Cost

Instructor-Led 3 days $2,450.00

There are no available classes for this course. If you're interested in taking this course, you can click the 'I'm Interested' button below.
 









 
UL and the UL logo are trademarks of UL LLC © 2019.